Drawer cabinets
Workshop trolley
Drawer storage walls
NC storage and transport systems
Workbenches and workstation systems
Cabinet systems
Shelving systems
Partition material and labelling system
Electronic access control systems
Spare parts and discontinued products
Drawer
Description
Drawers: Drawers with different front heights can be incorporated into the same cabinet housing in any order. The drawer walls are all equipped internally with a slotted grid in units (E) of 17 mm, which means each can be subdivided as desired.
Drawer safety devices, safety catch on right: This is the minimum requirement for mobile drawer cabinets. Single-sided drawer safety device on the right can be released with one hand and prevents accidental opening of the drawer if the cabinet is unlocked.
Notes
For filling and loading up the drawers and drawer cabinets, please follow the assembly instructions and the loading rules. Capacity applies with evenly distributed load.
The clear height of the cabinet housing is the defining factor for the selection of drawers. The sum of the drawer front heights (C) must be equal to the clear height (B) (see diagram).
A suspension plate art. no. 74.109.000 is mandatory for each drawer/pull-out shelf when installing drawers and pull-out shelves in NC cabinets.
Technical Data
Slotted dividers and metal separators
Slotted dividers and metal separators
Slotted dividers and metal separators
Non-slip mat
Foam insert
Foam underlay
